In 1998, a new way to fill sprayers was introduced: The Handler™. After more than 20 years of testing, The Handler™ is trusted by more than 30,000 garden and arable farmers in 28 countries worldwide. This patented system works faster and safer.
The Handler premixers
Handler 1
Prick, empty and rinse in an instant. Experience the extreme convenience of quick mixing of powders and dry products.
The Handler 1
The Handler I-i15, with a capacity of 55 liters, is the most compact version, perfectly tailored for direct crop protection input into sprayers. As a stand-alone unit, the Handler I has proven to be a favorite addition, often integrated directly from the factory into leading sprayers on the market.
What sets this variant apart is the specially designed venturi, optimized for sprayers up to a capacity of 1100 liters. This ensures efficiency even in smaller spraying applications.
Handler 2
Equipped with a 160-liter capacity, the Handler II mixes both liquid and dry products.
The Handler 2
The Handler II, with a 160-liter capacity, offers users the flexibility to mix liquids as well as dry products and powders. In addition, the agent can be dispensed directly into the sprayer as needed.
Its compact size, combined with accurate calibration, makes the Handler II ideal for dosing from bulk casks and drums. In addition, the system can be adapted for direct dosing from these bulk containers, eliminating the need for slower 12V chemical pumps.
As an added benefit, the Handler II comes with wireless Banjo manifold fittings, increasing efficiency and ease of use.
Handler 3
The Handler III, standard with the Banjo manifold system, offers a seamless mixing experience.
The Handler 3
With a capacity of 265 liters, the Handler III offers the ability to mix liquids as well as dry products and powders. In addition, the agent can be fed directly into the sprayer through a venturi during filling. For added convenience, the Handler III can be adapted for dispensing from bulk casks and drums, eliminating the reliance on slower 12V pumps.
As a bonus, the Handler III is available with a pump-mount frame and equipped with the RotoFlush tank flush cap, which helps prevent contamination, ensuring that your mixtures are always clean.
Handler 4
The Handler IV, the most impressive feed tank on the market, offers a generous 870-liter capacity.
The Handler 4
The Handler IV tops the list as the most robust and advanced feed tank on the market. Equipped with two 2″ agitators, double lids, 3″ manifold fittings and a tank with a tapered bottom for complete emptying, it is designed for maximum efficiency. In addition, it is optimized for forklift movement as standard and comes with a convenient collection tray.
With an impressive 870-liter capacity, the Handler IV allows users to mix a wide range of materials, from liquids to dry products and powders. It can also dispense directly from bulk drums, saving both time and resources.
The Handler IV is equipped not only with all the necessary 3″ piping for recirculation, but also with a RotoFlush tank flush cap to eliminate any form of product contamination. The sloped bottom allows the tank to be completely emptied, maximizing efficiency. The Handler IV makes filling your sprayer faster, easier and more cost-effective.
Features of The Handler
Each Handler comes complete with:
2 Or 3 inch camlocks for easy hook -up
1 Ff 4 high-peformance glass-filled polypropylene venturi fittings, to empty your Handler in seconds with virtually any transfer pump,
- A high-visibility, calibrated, cone-bottom tank that works on any terrain,
- Optional frames that accommodate any 2 or 3 inch transfer pump, & optional recirculation packages to allow for batch mixing.
The secret of The Handler
The patented knife
Within 30 seconds, you can fill a sprayer and do the following with the Handler premixer, which is equipped with a patented blade system:
- Cut plastic chemical jugs;
- Empty their contents for mixing;
- Fully rinse the jugs for safe disposal.
No residue
Crop protection agents are fully utilized. In fact, tests show that without rinsing, an average of about 60 grams of crop protection agent is left behind per cask
Combined with a dedicated Handler Venturi, the Handler premixer can save time and money and reduce exposure to potentially harmful agents.
Your Handler customized with:
Every Handler III and Handler IV comes standard with the patented RotaFlush.
This high capacity tank flush cap prevents cross contamination and flushes the tank smoothly and easily.
1 Sotera 850 flow meter and an adapter set for bulk kegs, you can use the Handler venturi to feed product directly into the filling line.
The non-mechanical process eliminates the need for slow chemical pumps and eliminates the risk of equipment failure.
Optional pump set with the Handler II, III and IV.
Each set features:
- A recirculation kit (allowing almost any crop protection product to be processed as a batch)
- A pump frame (Handler II and III only)
- All mounting accessories
- A versatile Banjo polypropylene pump with Honda petrol or Hatz diesel drive system.
Every Handling model features a piping system with the innovative Banjo manifold with wireless fitting. With this manifold system, assembly time is shorter, leakage is a thing of the past and parts are easier to repair or replace.
What customers think of us
Jan Jansen
JAMA Aardbei
Galder,
Netherlands
Van den Wijngaart
Van den Wijngaart en LavendelPlus
Ulvenhout,
Netherlands
News
Agenda
26-07-2024
-
29-07-2024
The Libramont Agricultural, Forestry and Agri-Food Fair is the largest open-air fair in the world. Each year it welcomes nearly [...]
Find your dealer
Search the map, enter your details or filter by brand to find the dealer near you!