This SmartSOLUTION could be the key to control your implement with section control as well. The SmartCONTROL module converts ISOBUS to CAN or serial control (sections and rate). Alternatively it can directly control sections of any implement using 12V output signals. SmartCONTROL can be used for both OEM applications and to retrofit onto supported equipment.
SmartCONTROL translates ISOBUS Task Control commands (section control) into 12V outputs or 3rd party CAN and Serial protocols. For the CAN/serial protocols also target and as-applied rates, are communicated between display and implement controller. With SmartCONTROL you can control your non-ISOBUS implement (i.e. sprayer spreader, planter or hoe) by ISOBUS.
Standard protocols are provided for:
SmartCONTROL USC is based on the Homburg SmartCONTROL system and by adding I/O modules it can now control up to 48 sections by providing a 12V signal. The I/O modules can directly control up to 8 sections each and provide up to 3A per section.
SmartCONTROL USC connects via ISOBUS IBBC connector to tractor and is compatible with almost any ISOBUS VT display which has TC (TaskController) capabilities.
The bridge between ISOBUS displays and non-ISOBUS implements working with CAN or serial protocols. Compatible brands for SmartCONTROL are: AGCO (includes Fendt VarioGuide including FendtOne, Valtra and Massey Ferguson), Ag Leader, Claas, CNH (includes Case, New Holland and Steyr), Deutz, John Deere, Kubota, Raven ISOBUS displays, Trimble and Topcon.
✔AGCO
✔Ag leader
✔Claas
✔CNH
✔Deutz
✔John Deere
✔Kubota
✔Raven
✔Trimble
✔Topcon
- Kees van Dun, Loonbedrijf Van Dun from Rutten -